Kitchen Addition in Bowie, MD

Bump-outs and full additions that give your kitchen the square footage it has always needed.

☎ Call (301) 679-9193

Get Your Free Kitchen Estimate

Tell us about your kitchen and what you want to change. We will visit, take measurements, and give you a clear written estimate — free, with no pressure.

Call or text now
(301) 679-9193
Serving Bowie and Prince George's County, MD
Every project is different — contact us for a free written estimate.

When the Kitchen Needs More Room, Not Just New Cabinets

Some Bowie kitchens cannot be fixed from the inside. The room is eight feet wide, the table lives in the dining room because there is nowhere else, and two cooks is a crowd. A kitchen addition — even a modest bump-out of a few feet — can be the difference between a kitchen you tolerate and one you love. It is the biggest project we do, and for the right house, it is the right project.

The most common addition we build is a rear bump-out: extending the kitchen four to eight feet into the backyard. That is enough for an island, a proper eat-in area, or both. Because it is a small footprint, it is far less disruptive and costly than a full two-story addition — but it still needs a foundation, a roof tie-in, and permits, so it is real construction, not a weekend project.

Foundations, Roofs, and Matching the House

An addition has to become part of the house, not a box bolted onto it. That means a real foundation — typically a poured or block foundation with proper footings below the frost line — framed walls tied into the existing structure, and a roof that sheds water the way the original does. The exterior gets matched: siding, brick, or whatever your house wears, plus windows that suit the original style. Inside, the floor level has to meet the existing floor exactly, which takes careful framing. Done right, guests cannot tell where the old house ends and the addition begins.

Permits and Setbacks

Additions need Prince George's County building permits, and the county cares about setbacks — how close you can build to the property lines. We check your lot's setbacks before we design anything, because a beautiful plan that violates the setback is a worthless plan. We handle the permit drawings, the applications, and the inspections from footing to final.

What It Does to the Rest of the House

An addition changes more than the kitchen. The electrical panel may need capacity for the new circuits. The HVAC system has to heat and cool the new square footage — sometimes that means extending a duct run, sometimes a mini-split for the new space. The backyard loses some lawn. We walk through all of it at the estimate so the full picture is clear before you decide.

How It Works: From Lot Survey to Final Inspection

Step 1 — Feasibility. We check setbacks, lot coverage, and HOA rules before designing anything. A beautiful plan that violates the setback is a worthless plan.

Step 2 — Design. The addition gets drawn with the kitchen: foundation, framing, roof tie-in, exterior match, and the interior floor plan as one integrated design.

Step 3 — Permits. We prepare the drawings and applications for Prince George's County, handle the review process, and schedule inspections.

Step 4 — Foundation and shell. Footings below the frost line, foundation walls, framing tied into the existing house, roof integrated and weathered in. The addition becomes structurally part of the house.

Step 5 — Interior build-out. From here it is a kitchen remodel: electrical, plumbing, HVAC, drywall, cabinets, counters, tile, paint — finished to the same standard as the rest of the project.

Step 6 — Final inspection and walkthrough. The county signs off, then we walk the whole project with you, inside and out.

Blending the Addition Inside and Out

The difference between an addition and a bump-out that looks original is the blending. Outside: matching siding or brick, a roofline that sheds water like the original, windows in the house's style, trim that lines up. Inside: the floor meets the existing floor dead level — no step, no ramp, no transition strip announcing "this is the new part." The ceiling height matches, the trim profile matches, and the paint flows uninterrupted.

The hardest blend is often the kitchen itself: new cabinets meeting old ones, or a whole new kitchen that has to feel like the house. When the addition houses the entire new kitchen, we design it as one room — no visual seam where the old wall stood. When it extends an existing kitchen, we match or intentionally contrast with skill. Either way, the goal is the same: guests should not be able to tell where the old house ends. That is the standard we build to.

Call (301) 679-9193 or send the form below for your free in-home estimate.

Frequently Asked Questions

How much space does a bump-out actually add?

A typical rear bump-out adds 4 to 8 feet of depth across the kitchen's width — often 100 to 200 square feet. That is enough for an island, an eat-in nook, or real counter runs on both sides. We will measure your lot and show you what fits within the setbacks.

Will an addition match my existing house?

Yes — that is a core part of the job. We match the siding or brick, the roof line, the window style, and the interior floor level so the addition reads as original to the house.

How long does a kitchen addition take?

Longer than a standard remodel — there is foundation work, framing, roofing, and more inspections. The written estimate includes a realistic schedule with the phases spelled out.

Do I need an architect for an addition?

For most bump-outs, our design and the county's permit process cover it. For larger or complex additions, we bring in structural engineering where the county requires it — and we manage that process for you.

☎ Call (301) 679-9193